1 / 12
+7
eXtremeRate Replacement Full Set Shell Case with Buttons & Wrist Strap Cover for Joycon of NS Switch - Monsters Brown & Yellow
Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
$6.30
Original: $20.99
-70%eXtremeRate Replacement Full Set Shell Case with Buttons & Wrist Strap Cover for Joycon of NS Switch - Monsters Brown & Yellow—
$20.99
$6.30Description
Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joy con with straps. Actually, they are housings with full set buttons for Nintendo Switch & Switch OLED Joy con and Wrist Strap without any electronic parts.
2. Requires customers to take apart the Joy con to replace the original shells and buttons. Requires customers with moderate electronic installation experience.
3. Tap here to check the installation guide video: eXtremeRate Nintendo Switch Full Set Shell Installation Guide
4. The shells are clear but not 100%.
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch the installation guide video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joy con you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joy con outer screws make sure you are using a tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joy con are spring-loaded, so be careful when opening.
Product Feature:
1. Upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. Personalize your handheld console.
4. It is a beautiful change up from a boring normal white without spending a ton of money.
Package Includes:
1* Left & Right Joy con shell with middle tray
1* Left & Right Strap shell
1* A/B/X/Y buttons
1* Direction Buttons
1* Home/Capture/+/- buttons
1* L/R/ZR/ZL buttons
2* SL/SR buttons for Joy con
2* SL/SR buttons for Wrist Strap
1* Screwdriver handle
1* Cross screwdriver bit
1* Y00 screwdriver bit
47* Screws
16* Springs
Note:
1. The console, Joy con, wrist strap and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
